![]() Then the Loxone mini server will be connected to the Loxone servers using this domain name. Once registered, the Loxone mini server will be assigned a specific domain name. Therefore, register the Loxone mini server at their sites first. Set port forwarding on the router to connect the Loxone app to the mini server in your LAN. The intercom login data obtained from are as follows: Configure the SIP account in the Services – Phone – SIP 1 or SIP 2 intercom section. Once the account is created, connect the intercom to this account using the login data provided by an. SIP Account SettingĪs already mentioned above, it is necessary to create an account on a public SIP server, which also allows calls to be received from unregistered sources. Therefore, it is necessary only to use the SIP servers that allow calls to be made via their servers without registration. The Loxone app is not a full SIP client, which should also be registered with the same Proxy server like the intercom. The Loxone mini server tries to make an anonymous call to an intercom registered with a SIP Proxy server (SIP data completed at Door Controller). The Loxone mini server/app cannot be registered with a SIP Proxy server. ![]() The configuration set on the Door Controller object is the same as the one used by the application. ![]() the Loxone mini server is not registered anywhere and just tries to set up a call to the defined destination.įor external calls outside the LAN, it is only necessary to register the intercom to a public SIP server. The Loxone app/Loxone mini server is always the one to initiate a SIP call. Set port forwarding for the application remote access and video receiving.Register the Loxone mini server on the Loxone web site.Create a SIP account on a public SIP server, which also allows anonymous call to be made, and then edit the settings both in the intercom and Loxone mini server.Download the latest version here.ĭo the following to receive calls from intercoms outside your LAN: The application is available for download at AppStore and GooglePlay. Incoming call enable and camera HTTP API access are the last step.Īpplication available for both iOS and Android. If someone presses the door unlock button in the Loxone app, the Loxone mini server sends the HTTP command with the dtmf key name and the intercom processes it and activates the output assigned to switch 1 in this example. HttpTrigger is another automation object, where the dtmf key name is set. When the button is pressed, the Delay object is activated and the intercom sends another HTPP command after a timeout to deactivate the virtual input in the Loxone mini server.Įxample: 192.168.50.182 /dev/sps/io/trigger/offįurthermore, you can add the PlayUserSound object and upload a user audio file with the ring tone or an informative message to signal to the user in front of the intercom that the intercom is trying to connect a call. Hence, the HTTP command URL format will only be 192.168.50.182 /dev/sps/io/trigger/on and the user name and password are completed in the respective fields. ![]() As the object has user name and password fields of its own, the user name and password need not be defined in the HTTP command directly. The SendHttpRequest object sends an HTTP command to the Loxone mini server. You can also create a new user and define its password so that admin need not be used. Edit the login data in the Peripheral menu in the Users section.
0 Comments
Leave a Reply. |